700 series GHD BTA drill head (GHD-01D20.00) — insert and support pads

BTA DRILLING · 700 SERIES

GHD drill headØ12–65 mm, one insert for many diameters.

The 700 series GHD is a BTA drill head for Ø12.00–65.00 mm. It comes as 700.10 (Ø12.00–33.30) and 700.20 (Ø33.31–65.00), and one insert type covers many diameters, which makes insert inventory easier to manage and reduces costs.

Find by diameter Catalogue PDF
RANGE
Ø12.00 – 65.00 mm
SERIES
700.10 · 700.20
SYSTEM
STS · EJECTOR
INSERT
LXET + LNXT support pad
EDGES
700.20: 2–3 edges

FEATURES

One insert, many diameters.Why the 700 series.

Features of the 700 series, as listed in the 2026 BTA Solution catalogue.

Ø12 – Ø65

Small to medium diameters

700.10 covers Ø12.00–33.30 and 700.20 covers Ø33.31–65.00 mm.

ONE INSERT

One insert, many diameters

A single insert type covers many diameters, which makes inventory easier to manage and reduces costs.

CHIP FLOW

Smooth chip evacuation

Chips clear easily, so productivity is maintained.

EASY CHANGE

Easy insert change

Inserts swap quickly to suit a wide range of materials.

SPECIFICATIONS

SpecificationsEnter a diameter to find the right head.

The finder searches 700.10 and 700.20 together. Values are taken from the original 2026 BTA Solution catalogue.

Series

Enter a diameter and press Find. Matching sizes appear here, and their rows are highlighted in the table below.

700.10 series (Ø12.00–33.30 mm)
Diameter range DmmTube ODmmProduct codedmmLmmInsertSupport pad
12.00~13.6011.0GHD-94D**.**9.658.0LXET06T104-DRLNXT0418-R055
13.61~13.9912.0GHD-95D**.**10.658.0LXET06T104-DRLNXT0418-R055
14.00~14.6212.0GHD-95D**.**10.658.0LXET080204-DRLNXT0418-R065
14.63~14.9913.0GHD-96D**.**11.658.0LXET080204-DRLNXT0418-R065
15.00~15.4913.0GHD-96D**.**11.658.0LXET080204-DRLNXT0618-R070
15.50~15.5913.0GHD-96D**.**11.658.0LXET080204-DRLNXT0618-R070
15.60~15.9914.0GHD-97D**.**12.660.0LXET080204-DRLNXT0618-R070
16.00~16.5014.0GHD-97D**.**12.660.0LXET09T204-DRLNXT0618-R075
16.51~16.6914.0GHD-97D**.**12.660.0LXET09T204-DRLNXT0618-R075
16.70~17.6915.0GHD-98D**.**13.660.0LXET09T204-DRLNXT0618-R075
17.70~17.9916.0GHD-99D**.**14.560.0LXET09T204-DRLNXT0618-R075
18.00~18.8916.0GHD-99D**.**14.560.0LXET100305-DRLNXT0618-R085
18.90~19.5017.0GHD-00D**.**15.561.0LXET100305-DRLNXT0618-R085
19.51~19.9917.0GHD-00D**.**15.561.0LXET100305-DRLNXT0618-R085
20.00~21.7918.0GHD-01D**.**16.061.0LXET110305-DRLNXT0618-R095
21.80~21.9920.0GHD-02D**.**18.061.0LXET110305-DRLNXT0618-R095
22.00~22.5020.0GHD-02D**.**18.061.0LXET13T305-DRLNXT0618-R105
22.51~24.0920.0GHD-02D**.**18.061.0LXET13T305-DRLNXT0618-R105
24.10~24.9922.0GHD-03D**.**19.565.0LXET13T305-DRLNXT0618-R105
25.00~26.3922.0GHD-03D**.**19.565.0LXET140405-DRLNXT0618-R120
26.40~28.6924.0GHD-04D**.**21.068.0LXET140405-DRLNXT0618-R120
28.70~30.9926.0GHD-05D**.**23.573.0LXET150405-DRLNXT0618-R130
31.00~33.3028.0GHD-06D**.**25.575.0LXET160505-DRLNXT0720-R140
  • The hole diameter goes in the **.** position of the product code. Example: GHD-01D20.00 = Ø20.00 mm head.
  • For diameters not in the table or special specifications, please send an enquiry with your drawing.

PARTS

Inserts · pads · screws.Replacement part codes.

Inserts and support pads are held by screws and replaced separately.

700.10 screws (Ø12.00–33.30)
Diameter rangemmInsert screwInsert screw driverSupport pad screwPad screw driver
12.00-13.99FTNA02205-M2.2TORX-T6FTNA02205-M2.2TORX-T6
14.00-14.99FTKA02543S-M2.5TORX-T8FTNA02205-M2.2TORX-T6
15.00-15.49FTKA02543S-M2.5TORX-T8FTKA02555-M2.5TORX-T7
15.50-16.50FTKA02543S-M2.5TORX-T8FTKA02555-M2.5TORX-T7
16.51-17.99FTKA02550S-M2.5TORX-T8FTKA02555-M2.5TORX-T7
18.00-19.50FTNA0305-M3.0TORX-T9FTKA02555-M2.5TORX-T7
19.51-21.99FTNA0306-M3.0TORX-T9FTKA02555-M2.5TORX-T7
22.00-22.50FTGA03575-M3.5TORX-T15FTKA02555-M2.5TORX-T7
22.51-28.69FTGA03508-M3.5TORX-T15FTKA02555-M2.5TORX-T7
28.70-33.30FTKA0410-M4.0TORX-T15FTKA0383-60-M3.0TORX-T9
700.20 inserts · screws (Ø33.31–65.00)
Diameter rangemmInsertInsert screwDriver
33.31-37.99LXET 13T305-DRFTGA03508-M3.5TORX-T15
38.00-43.00LXET 140405-DRFTGA03508-M3.5TORX-T15
43.01-47.00LXET 150405-DRFTKA0410-M4.0TORX-T15
47.01-52.49LXET 160505-DRFTKA0410-M4.0TORX-T15
52.50-56.20LXET 13T305-DRFTGA03508-M3.5TORX-T15
56.21-59.99LXET 13T305-DRFTGA03508-M3.5TORX-T15
60.00-65.00LXET 140405-DRFTGA03508-M3.5TORX-T15
700.20 support pad screws
Diameter rangemmSupport padSupport pad screwDriver
33.31-37.99LNXT 0720-R140FTKA0383-60-M3.0TORX PLUS T-9
38.00-47.00LNXT 0825-SUP5513 020-16-M3.5TORX PLUS T-10
47.01-59.99LNXT 1030-SUP416.1-833-M3.5TORX PLUS T-10
60.00-65.00LNXT 1235-SUP416.1-833-M3.5TORX PLUS T-10

INSERTS & GRADES

Inserts and grades.LXET inserts · LNXT pads.

Choose the 1st-choice grade for your workpiece material; use the 2nd choice when conditions are demanding.

Insert specifications (LXET)
InsertImmWmmSmm
LXET050104-DR7.76.051.5
LXET06T104-DR9.57.32.0
LXET080204-DR11.08.62.3
LXET09T204-DR12.08.62.8
LXET100305-DR13.510.63.0
LXET110305-DR15.011.73.3
LXET13T305-DR15.513.23.75
LXET140405-DR15.514.74.0
LXET150405-DR16.516.24.5
LXET160505-DR16.517.45.0
Support pad specifications (LNXT)
Support padImmWmmSmm
LNXT0418-R04518.04.02.2
LNXT0418-R05518.04.02.2
LNXT0418-R06518.04.02.2
LNXT0618-R07018.06.03.0
LNXT0618-R07518.06.03.0
LNXT0618-R08518.06.03.0
LNXT0618-R09518.06.03.0
LNXT0618-R10518.06.03.0
LNXT0618-R12018.06.03.0
LNXT0618-R13018.06.03.0
LNXT0720-R14020.07.03.5
Recommended insert grades
Material1st-choice grade2nd-choice grade
Steel (P)HM3SM3
Stainless steel (M)SM3IM3
Cast iron (K)HM3SM3
Non-ferrous metals (N)SM3IM3
Difficult-to-cut materials · heat-resistant alloys (S)IM3SM3
Recommended support pad grades
Material1st-choice grade2nd-choice grade
Steel (P)PM3IM3
Stainless steel (M)IM3PM3
Cast iron (K)PM3IM3
Non-ferrous metals (N)IM3PM3
Difficult-to-cut materials · heat-resistant alloys (S)IM3PM3

SYSTEM

For both tube systems.STS · EJECTOR

See how deep hole drilling works

STS · Single tube

SYSTEM
Single tube
COOLANT
Outside the tube → head
CHIPS
Out through the tube

Coolant is pushed in around the tube and carries the chips back out through it. Because the chips stay off the finished wall, the hole keeps its straightness and finish, even deep down.

EJECTOR · Double tube

SYSTEM
Double tube
COOLANT
Between outer and inner tubes
CHIPS
Drawn into the inner tube
MACHINE
Lathes · machining centres

Part of the coolant fed between the two tubes is jetted backwards, creating suction that draws the chips out. No sealed pressure head is needed, so deep holes can be drilled on conventional lathes and machining centres.

BTA DRILLING LINE-UP

For other diameters.BTA drilling line-up.

Below Ø25 mm choose the GHD; above Ø65 mm, the LHD or THD. The 500 series sets its diameter with cartridges.

All BTA drilling

Need a size that isn’t listed?Send us the drawing.

Tell us the workpiece material, hole diameter, depth and machine, and we will suggest the right tool.

+82-31-430-7094