MILLING CUTTER · MULTI · ROUND MILL

Multi · round mills8 series · 95 part numbers

Multi mill and round mill cutters using round inserts. All sizes are as in the Cutting Tools 2022 catalogue.

View sizes
SERIES
8
PART NO.
95
TYPE
Weldon shank · Carbide shank · Bore type
SOURCE
Cutting Tools 2022 catalogue

Searches 1,373 milling cutter part numbers. Enter at least two characters.

    SERIES

    Size tables by series.Multi · round mills: 8 series.

    Click a series name to go to its table. If you know the part number, use the search box above.

    RMCC · Ø16–26

    Weldon shank · Inserts: HITACHI · WALTER · Any Cut · Catalogue p. 22

    Photos 1 · Drawings 1
    Inserts used · 8 of 12 part nos.Inserts · Catalogue p. 86
    RDMT10T3 +1
    RDMT10T3(Z) +1
    Series summaryFrom catalogue p. 22
    Cutting dia. D
    Ø16 – 26 mm
    Shank d
    Ø16 · 20 · 25 mm
    Flutes
    2
    Part nos.
    12
    RMCC · Weldon shank
    Part no.DmmdmmLmmlmmFlutesInsertClampScrewWrench
    RMCC-160817016161701352RDMW0803—ST307-55 / M3TX-8
    RMCC-170817017161701352RDMW0803—ST307-55 / M3TX-8
    RMCC-200820020202001652RDMW0803CL2C 2CLCNST307-55 / M3TX-8
    RMCC-210820021202001652RDMW0803CL2C 2CLCNST307-55 / M3TX-8
    RMCC-201015020201501152RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-201020020202001652RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-211015021201501152RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-211020021202001652RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-251015025251501152RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-251020025252001552RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-261015026251501152RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15
    RMCC-261020026252001552RDMT10T3 RDMW10T3CL2C 2CLCNST408-43 / M4TX-15

    RMCC-H

    Weldon shank · Inserts: HITACHI · Any Cut · Catalogue p. 22

    Photos 1 · Drawings 1
    Inserts usedInserts · Catalogue p. 86
    RDMT0802
    RDMT0802(Z)
    Series summaryFrom catalogue p. 22
    Cutting dia. D
    Ø16 – 21 mm
    Shank d
    Ø16 · 20 mm
    Flutes
    2
    Part nos.
    4
    RMCC-H · Weldon shank
    Part no.DmmdmmLmmlmmFlutesInsertClampScrewWrench
    RMCC-1608170-H16161701352RDMT0802—ST261-140TX-8
    RMCC-1708170-H17161701352RDMT0802—ST261-140TX-8
    RMCC-2008200-H20202001652RDMT0802CL2C 2CLCNST261-140TX-8
    RMCC-2108200-H21202001652RDMT0802CL2C 2CLCNST261-140TX-8

    RMCC · Ø25–50

    Weldon shank · Inserts: HITACHI · WALTER · Any Cut · Catalogue p. 23

    Photos 1 · Drawings 1
    Inserts usedInserts · Catalogue p. 86
    RDMT 1204 +1
    RDMT1204(Z) +1
    Series summaryFrom catalogue p. 23
    Cutting dia. D
    Ø25 – 50 mm
    Shank d
    Ø25 · 32 · 42 mm
    Flutes
    2 · 3 · 4
    Part nos.
    28
    RMCC · Weldon shank
    Part no.DmmdmmLmmlmmFlutesInsertClampScrewWrench
    RMCC-251215025251501052RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-251220025252001552RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-251225025252502052RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-251230025253002552RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-261215026251501052RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-261220026252001552RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-261225026252502052RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-261230026253002552RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-321215032321501002RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-321220032322001502RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-321225032322502002RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-321230032323002502RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-331215033321501002RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-331220033322001502RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-331225033322502002RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-331230033323002502RDMT 1204 / RDMW 1204CL2C 2CLCNST4084-60 / M4TX-15
    RMCC-351215035321501053RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-351220035322001553RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-351230035323002553RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-401215040321501053RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-401220040322001553RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-401230040323002553RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-501215050321501054RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-501220050322001554RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-501230050323002554RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-5012150 L50421501054RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-5012200 L50422001554RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15
    RMCC-5012300 L50423002554RDMT 1204 / RDMW 1204CL2C 2CLCNST4101-60W / M4TX-15

    C-RDT · Catalogue p. 24 · Tungaloy · Any Cut

    Carbide shank · Inserts: Tungaloy · Any Cut · Catalogue p. 24

    Photos 1 · Drawings 1

    We are rechecking the specifications. For part numbers and dimensions in this series, please ask us.

    C-RDT · Catalogue p. 24 · DIJET

    Carbide shank · Inserts: DIJET · Catalogue p. 24

    Photos 1 · Drawings 1
    Series summaryFrom catalogue p. 24
    Cutting dia. D
    Ø10 – 17 mm
    Shank d
    Ø10 · 12 · 16 mm
    Flutes
    2 · 3
    Part nos.
    7
    From catalogue p. 24
    Insert
    RDHX 0501MOS +1
    Screw
    ST18042-60 / M1.8 +1
    Wrench
    TX-6 +1
    C-RDT · Carbide shank
    Part no.DmmdmmLmmFlutesInsertScrewWrench
    C-RDT-10×10×135L(R2.5)10101352RDHX 0501MOSST18042-60 / M1.8TX-6
    C-RDT-11×10×135L(R2.5)11101352RDHX 0501MOSST18042-60 / M1.8TX-6
    C-RDT-12×12×150L(R2.5)12121502RDHX 0501MOSST18042-60 / M1.8TX-6
    C-RDT-13×12×150L(R2.5)13121502RDHX 0501MOSST18042-60 / M1.8TX-6
    C-RDT-13×12×150L(R2.5)3F13121503RDHX 0501MOSST18042-60 / M1.8TX-6
    C-RDT-16×16×200L(R3.5)16162002RDMW 0701MOSST2553-55 / M2.5TX-8
    C-RDT-17×16×200L(R3.5)17162002RDMW 0701MOSST2553-55 / M2.5TX-8

    C-RDT · Catalogue p. 25 · MITSUBISHI

    Carbide shank · Inserts: MITSUBISHI · Catalogue p. 25

    Photos 1 · Drawings 1
    Series summaryFrom catalogue p. 25
    Cutting dia. D
    Ø10 – 17 mm
    Shank d
    Ø10 · 12 · 16 mm
    Flutes
    2 · 3
    Part nos.
    7
    From catalogue p. 25
    Insert
    RDMW 0517MOE +1
    Screw
    ST2043-60HM2.0 +1
    Wrench
    TX-6 +1
    C-RDT · Carbide shank
    Part no.DmmdmmLmmFlutesInsertScrewWrench
    C-RDT-10×10×135L(R2.5)10101352RDMW 0517MOEST2043-60HM2.0TX-6
    C-RDT-11×10×135L(R2.5)11101352RDMW 0517MOEST2043-60HM2.0TX-6
    C-RDT-12×12×150L(R2.5)12121502RDMW 0517MOEST2043-60HM2.0TX-6
    C-RDT-13×12×150L(R2.5)13121502RDMW 0517MOEST2043-60HM2.0TX-6
    C-RDT-13×12×150L(R2.5)3F13121503RDMW 0517MOEST2043-60HM2.0TX-6
    C-RDT-16×16×200L(R3.5)16162002RDMW 0724MOEST2553-55M2.5TX-8
    C-RDT-17×16×200L(R3.5)17162002RDMW 0724MOEST2553-55M2.5TX-8

    RSCC

    Bore type · Inserts: HITACHI · WALTER · Any Cut · Catalogue p. 25

    Photos 1 · Drawings 1
    Inserts usedInserts · Catalogue p. 86
    RDMT1204 +3
    RDMT1204(Z) +3
    Series summaryFrom catalogue p. 25
    Cutting dia. D
    Ø50 – 100 mm
    Bore d
    Ø22 – 32 mm
    Flutes
    3 – 6
    Part nos.
    11
    RSCC · Bore type
    Part no.DmmdmmLmmKmmFlutesInsertClampScrewWrench
    RSCC-0501222D50225010.43RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0501222D50225010.44RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0631222D63225010.45RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0631227D63275012.45RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0801227D80276012.46RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0801232D80326014.46RDMT1204 RDMW1204CL2C 2CLCNST4101-60WM4TX-15
    RSCC-0501622D50225010.43RDMT1605 RDMW16053CLCNST510-63PM5TX-20
    RSCC-0631622D63225010.44RDMT1605 RDMW16053CLCNST510-63PM5TX-20
    RSCC-0631627D63275012.44RDMT1605 RDMW16053CLCNST510-63PM5TX-20
    RSCC-0801627D80276012.44RDMT1605 RDMW16053CLCNST510-63PM5TX-20
    RSCC-0801632D80326014.44RDMT1605 RDMW16053CLCNST510-63PM5TX-20
    RSCC-1001631.75D10031.757013.15RDMT1605 RDMW16053CLCNST510-63PM5TX-20

    SSC

    Weldon shank · Inserts: TAEGU-TEC etc. · Catalogue p. 28

    Photos 1 · Drawings 1
    Series summaryFrom catalogue p. 28
    Cutting dia. D
    Ø50 · 63 mm
    Shank d
    Ø42 mm
    Flutes
    3
    Part nos.
    5
    From catalogue p. 28
    Insert
    TP... 2204
    Wrench
    L-5
    SSC · Weldon shank
    Part no.DmmdmmLmmlmmFlutesInsertPartsWrench
    SSC-D504222-2005042200503TP... 2204TP22L-5
    SSC-D504222-2505042250503TP... 2204TP22L-5
    SSC-D634222-2006342200503TP... 2204TP22L-5
    SSC-D634222-2506342250503TP... 2204TP22L-5
    SSC-D634222-3006342300503TP... 2204TP22L-5

    SSCC

    Bore type · Inserts: TAEGU-TEC etc. · Catalogue p. 28

    Photos 1 · Drawings 1

    We are rechecking the specifications. For part numbers and dimensions in this series, please ask us.

    C-RMMC

    Carbide shank · Inserts: DIJET · MITSUBISHI · KORLOY · Any Cut · Catalogue p. 47

    Photos 1 · Drawings 1
    Inserts usedInserts · Catalogue p. 77
    LRH 120 +9
    LRH120-R0.5 +28
    Series summaryFrom catalogue p. 47
    Cutting dia. D
    Ø12 – 32 mm
    Shank d
    Ø12 – 32 mm
    Part nos.
    14
    C-RMMC · Carbide shank
    Part no.DmmdmmLmmL1mmInsertScrewWrench
    C-RMMC-1212165121216535RMMC-120 / LRH 120, 130FSW-3509TX-10
    C-RMMC-1212200121220035RMMC-120 / LRH 120, 130FSW-3509TX-10
    C-RMMC-1616160161616040RMMC-160 / LRH 160, 170FSW-4013TX-15
    C-RMMC-1616200161620040RMMC-160 / LRH 160, 170FSW-4013TX-15
    C-RMMC-2020200202020045RMMC-200 / LRH 200, 210FSW-5016TX-20
    C-RMMC-2020250202025045RMMC-200 / LRH 200, 210FSW-5016TX-20
    C-RMMC-2525200252520050RMMC-250 / LRH 250, 260FSW-6020TX-30
    C-RMMC-2525250252525050RMMC-250 / LRH 250, 260FSW-6020TX-30
    C-RMMC-3032200303220050RMMC-300LRH 300FSW-8025TX-40
    C-RMMC-3032250303225050RMMC-300LRH 300FSW-8025TX-40
    C-RMMC-3032300303230050RMMC-300LRH 300FSW-8025TX-40
    C-RMMC-3232200323220050RMMC-320LRH 320FSW-8025TX-40
    C-RMMC-3232250323225050RMMC-320LRH 320FSW-8025TX-40
    C-RMMC-3232300323230050RMMC-320LRH 320FSW-8025TX-40

    RMMC

    Weldon shank · Inserts: DIJET · MITSUBISHI · KORLOY · Any Cut · Catalogue p. 47

    Drawings 1
    Inserts usedInserts · Catalogue p. 77
    LRH 120 +9
    LRH120-R0.5 +28
    Series summaryFrom catalogue p. 47
    Cutting dia. D
    Ø12 – 32 mm
    Shank d
    Ø12 – 32 mm
    Part nos.
    14
    RMMC · Weldon shank
    Part no.DmmdmmLmmL1mmInsertScrewWrench
    RMMC-1212165121215035RNM-120 / LRH 120, 130FSW-3509TX-10
    RMMC-1212200121218035RNM-120 / LRH 120, 130FSW-3509TX-10
    RMMC-1616160161616040RNM-160 / LRH 160, 170FSW-4013TX-15
    RMMC-1616200161620040RNM-160 / LRH 160, 170FSW-4013TX-15
    RMMC-2020200202020045RNM-200 / LRH 200, 210FSW-5016TX-20
    RMMC-2020250202025045RNM-200 / LRH 200, 210FSW-5016TX-20
    RMMC-2525200252520050RNM-250 / LRH 250, 260FSW-6020TX-30
    RMMC-2525250252525050RNM-250 / LRH 250, 260FSW-6020TX-30
    RMMC-3032200303220050RNM-300LRH 300FSW-8025TX-40
    RMMC-3032250303225050RNM-300LRH 300FSW-8025TX-40
    RMMC-3032300303230050RNM-300LRH 300FSW-8025TX-40
    RMMC-3232200323220050RNM-320LRH 320FSW-8025TX-40
    RMMC-3232250323225050RNM-320LRH 320FSW-8025TX-40
    RMMC-3232300323230050RNM-320LRH 320FSW-8025TX-40

    MILLING CUTTER

    Need a size that isn’t listed?Send us the drawing.

    Share a part number, a drawing or your machining conditions, and we will suggest the right cutter.

    +82-31-430-7094